Ключевые слова: aviation application, propulsion system, HTS, REBCO, coated conductors, tapes, stacked blocks, ac losses, ex-situ process
Ключевые слова: MgB2, bulk, disks, fabrication, in-situ process, infiltration process, precursors, X-ray diffraction, trapped field, temperature dependence, experimental results
Izumi T., Aoki Y., Iwakuma M., Takahashi Y., Sato M., Miura M., Machi T., Nakaoka K., Nakanishi T., Konno M., Hirai H., Shiohara K., Adachi K., Hirose H.
Ключевые слова: MgB2, bulk, tubes, trapped field, NMR magnet, homogeneity, measurement technique
Ключевые слова: MgB2, bulk, trapped field, pulsed magnetization, iron yoke, cylinders, plates, Cu-based conductors, experimental results
Ключевые слова: MgB2, bulk, composites, stacked blocks, fabrication, hot isostatic pressing, trapped field, magnets, experimental results
Ключевые слова: ITER, central coils, photo, Japan, cable-in-conduit conductor, fabrication, test results, SULTAN, design parameters, current sharing, neutron diffraction, twist-pitch
Ключевые слова: ITER, coils toroidal, coils insert, LTS, Nb3Sn, cable-in-conduit conductor, minimum quench energy, measurement technique, measurement setup
Ключевые слова: LTS, Nb3Sn, strands, cooling technology, thermal strain, thermal expansion, fabrication, X-ray diffraction, experimental results
Breschi M., Koizumi N., Takahashi Y., Isono T., Hemmi T., Kawano K., Devred A., Martovetsky N., Bessette D., Suwa T., Gauthier F., Ozeki H.
Ключевые слова: ITER, coils toroidal, coils insert, loads, cycling, current sharing, temperature distribution, SULTAN, test results, strain effects
Ключевые слова: HTS, coated conductors, fabrication, substrate Hastelloy, buffer layers, planarization, MOD process, roughness, YBCO, PLD process, laminations
Ключевые слова: ITER, coils toroidal, induction heating, calorimetric method, experimental results, numerical analysis
Martovetsky N., Isono T., Bessette D., Takahashi Y., Nunoya Y., Nabara Y., Ozeki H., Kawano K., Saito T., Suwa T., Okuno K., Devred A., Gauthier F., Mitchell N., Zanino R., Savoldi L., Bonifetto R., Breschi M., Ciazynski D., Reiersen W., Smirnov A., Khodak A., Bruzzone P., Rodin I.*10, Tronza V.*11, Torre A., Nicollet S., Zani L., Louzguiti A., Duchateau J.-L.
Ключевые слова: ITER, central coils, coils insert, test results, degradation studies, ac losses, mechanical properties, strain effects, quench propagation, stability, heating rates
Bruzzone P., Stepanov B., Koizumi N., Nunoya Y., Matsui K., Okuno K., Takahashi Y., Isono T., Hemmi T., Tsutsumi F., Shibutani K., Nabara Y., Murakami Y., Kajitani H., Oshikiri M., Uno Y., Iguchi M., Suwa T., Ozeki H., Sedlak K., Takano T., Sakurai T.
Ключевые слова: LTS, Nb3Sn, wires multifilamentary, central coils, ITER, current sharing, cycling, electric field, temperature dependence, mechanical properties, strain effects, ac losses
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.